Installation Instruction

How Do I Mount My Mantle To A Masonry Fireplace? 1. Determine location of the flue for fireplace. Do not drill holes within 12 inches of either side. 2. Determine height of mantle. Stay 20" minimum from top of fireplace doors or firebox opening, check with local building codes. 3. Drill two holes in fireplace with masonry bit 3/4", approximately 4" deep. 4. Put 2-3 ounces high temperature silicone into the holes and place 10" x 3/4" rebar (reddy bar) into holes. 5. Place mantle at desired level, mark holes in flat side, and drill with 3/4" wood bit. Push mantle onto bolts with 2-3 ounces high temperature silicone in each hole.

How Do I Mount My Mantle On Cultured Stone Fireplace - Wood Framed 1. Mount a 2x4. 12 inches shorter than the mantle, to the back of the mantle. From the hardware store, buy two or three metal plates (1/8" x 1" x 8") and a dozen 3" wood screws. Mount the plates to the 2x4 spaced to fit the stud in the wall. Hold mantle up to the desired height and screw to wall. Place cultured stone around the mantle.