Online Catalogue

Customer Login     About Us     Contact Us     Follow Us: 

FREE SHIPPING
(to contiguous USA)
 1-888-986-1535
Hours: Mon-Fri 9-6
 

 
 


Mantel World is an Upfront Merchant on TheFind. Click for info.

SSL CertificateExtended Validation SSL
spacer
 

   Wood Mantels  Cabinets  Wall and Corner Cabinets  Mission Cabinet - Wall and Corner Application

Mission Custom Fireplace Cabinet - Wall and Corner Application (FPF)


Starting from $1,584.00



Select Wood Type

Select Correct Cabinet Size
View Size

Select Cabinet Base
View Base

Select Finish
View Finish



Quantity:  

Mission Custom Fireplace Cabinet - Wall and Corner Application (FPF)
Mission Cabinet - Large





Accentuate your home with a fireplace cabinet and give your fireplace the attention it deserves. Our individually made cabinets are the perfect addition to your fireplace. If the following size options don't suit your needs, please call us at 1-888-986-1535 for a custom quote.

Size A
Inside Opening Dimensions: 38"W x 36"H x 17"D

Outside Dimensions, Flush
W = Width = 54"
D = Depth = 19"
H = Height = 48"
TL = Top Length = 55"
TD = Top Depth = 21"
From floor to bottom of shelf = 47"

Outside Dimensions, Corner
W = Width = 49"
DW = Depth Wall = 46"
H = Height = 48"
TL = Top Length = 65"
TD = Top Depth = 38"
From floor to bottom of shelf = 47"

Size B
Inside Opening Dimensions: 44"W x 40"H x 20"D

Outside Dimensions, Flush
W = Width = 60"
D = Depth = 21"
H = Height = 52"
TL = Top Length = 62"
TD = Top Depth = 24"
From floor to bottom of shelf = 51"

Outside Dimensions, Corner
W = Width = 55"
DW = Depth Wall = 50.5"
H = Height = 52"
TL = Top Length = 71.5"
TD = Top Depth = 41"
From floor to bottom of shelf = 51"


2-3 Weeks


Use the following with the Dimensions link, located above, to determine your proper cabinet size. Custom sizes are available - please call us at 1-888-986-1535 if interested.

Outside Dimensions:
W = Width, at base
TL = Top Length, includes shelf in dimensions
D = Depth, at base
DW = Depth Wall, depth of cabinet along wall corner
TD = Top Depth, includes shelf in dimensions
H = Height of cabinet
F = Filler pieces to achieve fit

Purchaser and Installer are responsible for firebox manufacturer’s clearance.


All the mantels on this web site will meet building codes in most areas of the United States, it is the customer's responsibility to contact their local building code authority to determine if the the mantel opening fits the local building code. If there is no code for mantel openings in relation to firebox openings in your particular area, we strongly suggest the mantel and firebox meet the National Building Code. The following is a reprint from the Standard Building Code.

2114.3 MASONRY FIREPLACES
2114.36 Fireplace hearth extensions shall be of approved noncombustible materials for all fireplaces. Where the fireplace opening is less than 6 sq.ft. (0.56m²), the hearth extension shall extend at least 16 inches (406mm) in front of the facing material and at least 8 inches (203mm) beyond each side of fireplace opening. Where fireplace opening is 6 sq.ft. (0.56m²) or larger, the hearth extension shall extend at least 20 inches (508mm) in front of the facing materials and at least 12 inches (305mm) beyond each side of the fireplace opening. Where a fireplace is elevated above or overhangs a floor, the hearth extension shall also extend over the area under the fireplace.

2114.3.7 Fireplaces constructed of masonry or reinforced concrete shall have hearth extensions of brick, concrete, stone, tile, or other approved noncombustible material properly supported and with no combustible material against the underside thereof. Wooden form or centers used during the construction of a hearth and hearth extensions shall be removed when construction is completed.
EXCEPTION: A header of combustible material may be used to support the hearth extension provided that it is located more than 12 inches (305mm) from the face of the fireplace.

2114.3.8 All combustible wood beams, joist, and studs shall be maintained a minimum of 2 inches (51mm) from the outside face of the chimney or fireplace masonry. Headers supporting trimmer arches at fireplaces shall be not less than 20 inches (508mm) from the face of the chimney breast. Trimmers shall be not less than 6 inches (152mm) from the inside face of face of the nearest flue lining.

2114.3.9 Woodwork shall not be placed within 4 inches (102mm) of the back of the fireplace, but shall not prevent plastering directly on the masonry or metal lath and metal furring.

2114.3.10 All combustible mantels and similar trim shall be kept at least 6 inches from fireplace opening. Parts of the mantel assembly located along the sides of the fireplace opening, which project more than 1-1/2 inches (38mm) from the face of the fireplace, shall have additional clearance equal to he projection. Parts of the mantel assembly located above and projecting more than 1-1/2 inches (38mm) from the fireplace opening shall not be placed less than 12 inches (305mm) from the top of the fireplace opening.

2806 FIREPLACES FACTORY BUILT
2086.1 Factory- Built Fireplace
2806.1.1 Factory built fireplaces shall be listed and shall be installed in accordance with the conditions of the listing.
2806.1.2 Factory built fireplaces shall be tested in accordance with and meet the requirements of UL 127
2806.1.3 Hearth extensions of approved factory-built fireplace stoves shall be installed in accordance with the listing. Masonry hearth extensions if used with factory-built fireplaces shall be installed as required in 2144.3.8. The hearth extension shall be readily distinguished from the surrounding area.
2806.1.4 Factory built fireplace shall be installed in accordance with 2114.3.12

2806.2 Factory-Built Fireplace Stoves and Solid Fuel Room Heaters

2806.2.1 Factory built fireplace stoves and solid fuel type room heaters shall be listed and shall be installed in accordance with the conditions of the listing. The factory-built fireplace stoves shall be tested in accordance with and meet requirements of UL737. The solid fuel type room heaters shall be tested in accordance with and meet requirements of UL1482.
2862.2.2 Factory-built fireplace stoves shall also be installed in accordance with 2806.12 and 2114.3.12

2806 FIREPLACES FACTORY BUILT
False fireplaces may be used in connection with listed gas or electric heaters, provided such fireplaces are constructed of noncombustible materials.


To ensure an everlasting and secure product, every component comprising each mantel, cabinet and shelf is glued before being nailed into place.

*Available in oak only


Flush Cabinets
1. Remove existing baseboard.
2. If necessary, trim the filler pieces (F) to fireplace height. The 3/4" blockings (G) come attached to the filler pieces (F) for installations using marble between the filler and the mantle. Turn the filler piece (F) so that the blocking sections are facing out if space is needed for marble; face it in (blockings (G) toward the back) if no marble is being used.
3. Attach the fillers (E&F) to the front of the fireplace by screwing (from back to front) through the side flanges of the fireplace. Use 1/2" screws with blockings (G) facing backwards. To use with marble, screw fillers (E&F) to the side mounting flange of the fireplace from behind the flange with 1/2" wood screws with blockings (G) facing forward.
4. Assemble the mantle front by inserting one leg (D) into the holes in the bottom of the mantle breast (C) and tightening the cam to lock into position. Repeat with other leg (D).
5. Attach the sides (B) to the back of the mantle (C&D) by screwing the 1 5/8" sheetrock screws into the predrilled holes (from back to front).
6. Determine where to place the shelf support on the wall by placing the cabinet over the fireplace, against the wall. Make sure minimum clearances comply with the manufacturers and local fire codes between the fireplace and cabinet or other combustibles. Draw a line along the top of parts (B) where they meet the wall. Check with level. Attach the shelf support to the wall just under this line by screwing through the shelf support into studs with 2 1/2" screws.
7. Fasten the cabinet to the filler pieces (E&F) by screwing them together (from inside the back of the mantle to the front) with 1" screws.
8. Set top (A) on cabinet and secure with #4 finish nails. (Predrill for finish nails.)
9. Sand unit lightly before finishing

Corner Cabinets
1. Remove existing baseboard.
2. If necessary, trim the filler pieces (F) to fireplace height. The 3/4” blockings (G) come attached to the filler pieces (F) for installations using marble between the filler and the mantle. Turn the filler piece (F) so that the blocking sections are facing out if space is needed for marble; face it in (blockings (G) toward the back) if no marble is being used.
3. Attach the fillers (E&F) to the front of the fireplace by screwing (from front to back) through the side flanges of the fireplace. Use 1/2" screws with blockings (G) facing backwards. To use with marble, screw fillers (E&F) to the side mounting flange of the fireplace from behind the flange with 1/2" wood screws with blockings (G) facing forward.
4. Assemble the cabinet front by inserting one leg (D) into the holes in the bottom of the mantle breast (C) and tightening the cam to lock into position. Repeat with other leg (D).
5. Attach the sides (B) to the back of the mantle (C&D) by screwing the 1 5/8" sheetrock screws into the predrilled holes (from back to front).
6. Determine where to place the shelf supports on the wall by placing the cabinet over the fireplace, against the wall, on a hard flat surface. Make sure minimum clearances comply with the manufacturers and local fire codes between the fireplace and cabinet or other combustibles. With a pencil, mark the wall on each side where the top of (C) meets the wall. Using a level, draw a line from these marks to the corner where the 2 walls meet. Attach the shelf supports (H) to the wall just below these 2 lines by screwing through the shelf supports into studs with 2 1/2" screws.
7. Fasten the cabinet to the filler pieces (E&F) by screwing them together (from inside the back of the cabinet to the front) with 1" screws.
8. Slide the two sections of top (A) together and fasten with 1" screws and/or glue. Set the top on the cabinet and secure with #4 finish nails. (Predrill holes for finish nails).
9. Sand unit lightly before finishing.


Coming soon