Online Catalogue

Customer Login     About Us     Contact Us     Follow Us: 

FREE SHIPPING
(to contiguous USA)
 1-888-986-1535
Hours: Mon-Fri 9-6
 

 
 


Mantel World is an Upfront Merchant on TheFind. Click for info.

SSL CertificateExtended Validation SSL
spacer
 

   Wood Mantels  The Handcarved Wood Mantel Series  Handcarved Wood Mantel Model #1129

Handcarved Wood Mantel Model #1129

Handcarved Custom Wood Mantel Model #1129 (PNC)


Starting from $3,429.00



Select Wood Type

Select ¾" Thick Sanded Trimmer Board
View Trimmer Boards



Quantity:  

Handcarved Custom Wood Mantel Model #1129 (PNC)
#1129 - Large





A mantel compliments a room like a fine piece of furniture. It's the ultimate decor for your fireplace - don't let it remain bare.

Opening (between legs): 49"W x 36"H x 4 1/2" Inside projection for surround
Max Dimensions: 84"W x 55"H x 16 1/2"D

For larger dimensions, please call 1-888-986-1535 for a Custom Quote.

Proudly made in America


Custom carved at time of order
6-8 Weeks


Since the mantel is the last piece to be installed during a fireplace installation, measure the width and height of the overall outside of the fireplace and any facing material (marble, slate, brick, etc.) first. This measurement should also accommodate for any mantel overlap that you may want to cover the edge of the facing.

Be sure that there is enough clearance to combustibles, meaning that your local building codes and fireplace model specifications determine how far away combustible materials, such as a wood mantel, must be from the face of the fireplace. Your professional builder and/or installer will know how to determine this and accommodate for it.

Next, depending on what facing material is used, will determine the depth of the inside return of the mantel. By 'return' we mean the depth of the measurement from the back/inside face of the mantel to the wall where it is being installed. We recommend taking three different measurements of the thickness of the facing material and using the largest of the three.

Larger returns are available for thicker facing material applications, for instance brick. The return will simply increase to accommodate the thickness of the facing. The return will always need to be at least ¼" greater than the facing material's thickest point, and this will also ensure accommodations for any walls that are not smooth.

Once you have this information, opening W x H x D, for your mantel, be sure there are no restrictions to accommodate the overall outside measurements of the mantel. Windows placed close to the fireplace, wall outlets/switches, and other obstructions above the fireplace may drastically alter your mantel measurements. It is best to notify us of these restrictions FIRST, before beginning to determine measurements for your mantel.

Congratulations. You now have the full information required and are ready to proceed with purchasing your new mantel.

Purchaser and Installer are responsible for firebox manufacturer’s clearance.


All the mantels on this web site will meet building codes in most areas of the United States, it is the customer's responsibility to contact their local building code authority to determine if the the mantel opening fits the local building code. If there is no code for mantel openings in relation to firebox openings in your particular area, we strongly suggest the mantel and firebox meet the National Building Code. The following is a reprint from the Standard Building Code.

2114.3 MASONRY FIREPLACES
2114.36 Fireplace hearth extensions shall be of approved noncombustible materials for all fireplaces. Where the fireplace opening is less than 6 sq.ft. (0.56m²), the hearth extension shall extend at least 16 inches (406mm) in front of the facing material and at least 8 inches (203mm) beyond each side of fireplace opening. Where fireplace opening is 6 sq.ft. (0.56m²) or larger, the hearth extension shall extend at least 20 inches (508mm) in front of the facing materials and at least 12 inches (305mm) beyond each side of the fireplace opening. Where a fireplace is elevated above or overhangs a floor, the hearth extension shall also extend over the area under the fireplace.

2114.3.7 Fireplaces constructed of masonry or reinforced concrete shall have hearth extensions of brick, concrete, stone, tile, or other approved noncombustible material properly supported and with no combustible material against the underside thereof. Wooden form or centers used during the construction of a hearth and hearth extensions shall be removed when construction is completed.
EXCEPTION: A header of combustible material may be used to support the hearth extension provided that it is located more than 12 inches (305mm) from the face of the fireplace.

2114.3.8 All combustible wood beams, joist, and studs shall be maintained a minimum of 2 inches (51mm) from the outside face of the chimney or fireplace masonry. Headers supporting trimmer arches at fireplaces shall be not less than 20 inches (508mm) from the face of the chimney breast. Trimmers shall be not less than 6 inches (152mm) from the inside face of face of the nearest flue lining.

2114.3.9 Woodwork shall not be placed within 4 inches (102mm) of the back of the fireplace, but shall not prevent plastering directly on the masonry or metal lath and metal furring.

2114.3.10 All combustible mantels and similar trim shall be kept at least 6 inches from fireplace opening. Parts of the mantel assembly located along the sides of the fireplace opening, which project more than 1-1/2 inches (38mm) from the face of the fireplace, shall have additional clearance equal to he projection. Parts of the mantel assembly located above and projecting more than 1-1/2 inches (38mm) from the fireplace opening shall not be placed less than 12 inches (305mm) from the top of the fireplace opening.

2806 FIREPLACES FACTORY BUILT
2086.1 Factory- Built Fireplace
2806.1.1 Factory built fireplaces shall be listed and shall be installed in accordance with the conditions of the listing.
2806.1.2 Factory built fireplaces shall be tested in accordance with and meet the requirements of UL 127
2806.1.3 Hearth extensions of approved factory-built fireplace stoves shall be installed in accordance with the listing. Masonry hearth extensions if used with factory-built fireplaces shall be installed as required in 2144.3.8. The hearth extension shall be readily distinguished from the surrounding area.
2806.1.4 Factory built fireplace shall be installed in accordance with 2114.3.12

2806.2 Factory-Built Fireplace Stoves and Solid Fuel Room Heaters

2806.2.1 Factory built fireplace stoves and solid fuel type room heaters shall be listed and shall be installed in accordance with the conditions of the listing. The factory-built fireplace stoves shall be tested in accordance with and meet requirements of UL737. The solid fuel type room heaters shall be tested in accordance with and meet requirements of UL1482.
2862.2.2 Factory-built fireplace stoves shall also be installed in accordance with 2806.12 and 2114.3.12

2806 FIREPLACES FACTORY BUILT
False fireplaces may be used in connection with listed gas or electric heaters, provided such fireplaces are constructed of noncombustible materials.


Shipped assembled and unfinished


Coming soon


Coming soon