Online Catalogue

Customer Login     About Us     Contact Us     Follow Us: 

FREE SHIPPING
(to contiguous USA)
 1-888-986-1535
Hours: Mon-Fri 9-6
 

 
 


Mantel World is an Upfront Merchant on TheFind. Click for info.

SSL CertificateExtended Validation SSL
spacer
 

   Wood Mantels  Arch Wood Fireplace Mantels  Greenwich Arch Mantel

Greenwich Arch Custom Mantel (FPF)


Starting from $1,489.00



Select Wood Type

Select Finish
View Finish




Quantity:  

Greenwich Arch Custom Mantel (FPF)
Greenwich Arch - Large





Choose a mantel crafted with design, budget, and ease of installation in mind. Our individually made custom mantels are the perfect addition to your fireplace.

For larger dimensions, please call 1-888-986-1535 for a Custom Quote.

Proudly made in America


2-3 Weeks


Use the following with the Dimensions link, located above.

W = Finished width of opening, inside leg to leg, excludes 3/8" scribes, tile, slate, marble, and/or brick facings
H = Finished height of opening, measure from floor unless leg rests on hearth surface (excludes 3/8" top scribe)
R = Depth of return, use largest of several measurements on sides and top, from front of facing to wall and add 1/2"
OLW = Overall OUTSIDE leg width
OH = Overall height of floor to top of shelf
OL = Shelf length


All the mantels on this web site will meet building codes in most areas of the United States, it is the customer's responsibility to contact their local building code authority to determine if the the mantel opening fits the local building code. If there is no code for mantel openings in relation to firebox openings in your particular area, we strongly suggest the mantel and firebox meet the National Building Code. The following is a reprint from the Standard Building Code.

2114.3 MASONRY FIREPLACES
2114.36 Fireplace hearth extensions shall be of approved noncombustible materials for all fireplaces. Where the fireplace opening is less than 6 sq.ft. (0.56m²), the hearth extension shall extend at least 16 inches (406mm) in front of the facing material and at least 8 inches (203mm) beyond each side of fireplace opening. Where fireplace opening is 6 sq.ft. (0.56m²) or larger, the hearth extension shall extend at least 20 inches (508mm) in front of the facing materials and at least 12 inches (305mm) beyond each side of the fireplace opening. Where a fireplace is elevated above or overhangs a floor, the hearth extension shall also extend over the area under the fireplace.

2114.3.7 Fireplaces constructed of masonry or reinforced concrete shall have hearth extensions of brick, concrete, stone, tile, or other approved noncombustible material properly supported and with no combustible material against the underside thereof. Wooden form or centers used during the construction of a hearth and hearth extensions shall be removed when construction is completed.
EXCEPTION: A header of combustible material may be used to support the hearth extension provided that it is located more than 12 inches (305mm) from the face of the fireplace.

2114.3.8 All combustible wood beams, joist, and studs shall be maintained a minimum of 2 inches (51mm) from the outside face of the chimney or fireplace masonry. Headers supporting trimmer arches at fireplaces shall be not less than 20 inches (508mm) from the face of the chimney breast. Trimmers shall be not less than 6 inches (152mm) from the inside face of face of the nearest flue lining.

2114.3.9 Woodwork shall not be placed within 4 inches (102mm) of the back of the fireplace, but shall not prevent plastering directly on the masonry or metal lath and metal furring.

2114.3.10 All combustible mantels and similar trim shall be kept at least 6 inches from fireplace opening. Parts of the mantel assembly located along the sides of the fireplace opening, which project more than 1-1/2 inches (38mm) from the face of the fireplace, shall have additional clearance equal to he projection. Parts of the mantel assembly located above and projecting more than 1-1/2 inches (38mm) from the fireplace opening shall not be placed less than 12 inches (305mm) from the top of the fireplace opening.

2806 FIREPLACES FACTORY BUILT
2086.1 Factory- Built Fireplace
2806.1.1 Factory built fireplaces shall be listed and shall be installed in accordance with the conditions of the listing.
2806.1.2 Factory built fireplaces shall be tested in accordance with and meet the requirements of UL 127
2806.1.3 Hearth extensions of approved factory-built fireplace stoves shall be installed in accordance with the listing. Masonry hearth extensions if used with factory-built fireplaces shall be installed as required in 2144.3.8. The hearth extension shall be readily distinguished from the surrounding area.
2806.1.4 Factory built fireplace shall be installed in accordance with 2114.3.12

2806.2 Factory-Built Fireplace Stoves and Solid Fuel Room Heaters

2806.2.1 Factory built fireplace stoves and solid fuel type room heaters shall be listed and shall be installed in accordance with the conditions of the listing. The factory-built fireplace stoves shall be tested in accordance with and meet requirements of UL737. The solid fuel type room heaters shall be tested in accordance with and meet requirements of UL1482.
2862.2.2 Factory-built fireplace stoves shall also be installed in accordance with 2806.12 and 2114.3.12

2806 FIREPLACES FACTORY BUILT
False fireplaces may be used in connection with listed gas or electric heaters, provided such fireplaces are constructed of noncombustible materials.


To ensure an everlasting and secure product, every component comprising each mantel, cabinet and shelf is glued before being nailed into place.


A.) Place breast and shelf assembly upside down on the floor.
B.) Attach legs to breast, inserting pins in the end of legs into the holes in the breast assembly and lock CAMS. Glue may be applied to mating surfaces.
C.) Carefully lift mantle against wall, centering above fireplace opening. Check for level and make light pencil mark on wall along top shelf.
D.) Remove mantel from wall and set aside.
E.) Measure 5 3/8" down from line on wall and mark second line on wall.
F.) Screw mounting bracket to wall through studs with 2 1/2" sheetrock screws just above lower pencil line.
G.) Tap shelf downward with hammer using a wood block to protect shelf, until mantel fits snugly down on mounting bracket and legs touch the floor. (It may be necessary to adjust bracket up or down for perfect fit).
H.) Once you are sure you have mantel situated correctly on the wall, remove and glue, or caulk, to back edges of legs and rehang on mounting bracket. Or, drill through the bottom outside edge of leg down into floor being careful not to chip hearth) and anchor with #10 finish nails.
I.) Once mantel is secured to wall you can install the precut scribe moldings to cover the inside edges of the mantel opening using small brads or finish nails. (Predrilling to avoid splitting is recommended).

Before filling impact holes, we recommend using a clear oil base sealer on mantels that are to be finished natural or with stain to avoid staining surrounding wood with the filler. Use a good oil base primer for mantels being painted. Some light sanding before finish coat will reduce raised grain on wood.
Do not use water base paint on bare wood as it may cause warpage.


Coming soon